10S MediaOne Samson
 Active Studio Subwoofer


(1 pc)



Overview

Media Bass.

Samson's MediaOne 10S Active Studio Subwoofer is the ideal subwoofer for all your multimedia needs. Whether you're listening to music, producing tracks, watching videos or gaming, the MediaOne 10S offers premium performance with incredible low-end clarity. It's the perfect addition to any home studio and entertainment center, as well as Samson MediaOne Series active studio monitor setups.

The MediaOne 10S has been designed from the ground up to provide accurate monitoring of low frequencies and produce engaging, clear bass. With a powerful 10 "copolymer woofer and tuned bass reflex port, the MediaOne 10S will enhance any monitoring setup with an extended low frequency response. In addition, its all-wood cabinet construction and elegant protective mesh grill assure the subwoofer looks as good in your home studio, living room or den as it sounds.

The back panel of the MediaOne 10S features RCA inputs for directly connecting your music source, as well as RCA outputs to hook up your main monitors. It also features Speaker Level input and output terminals for connecting A / V receivers and / or additional speakers to expand home theater setups. In addition, the MediaOne 10S offers a Variable Low Pass frequency control so you can personalize your low-end preferences.


Features


Watts of Power 100 10 "WOOFER copolymer with butyl Surround Down-firing is done tuned Bass Reflex Port Variable Low Pass Frequency Control. RCA inputs and outputs Speaker Level inputs and outputs for the Stereo System the Connections Phase Switch Subwoofer Volume Control. The Selectable Sleep Mode Auto ; Protective mesh Grill









Rear Panel Callouts


1. VOLUME - Controls the overall output level for the MediaOne 10S subwoofer.

LOW PASS 2. (Hz) - The Adjusts the Low Frequency Filter END of the Range from the SUBWOOFER The  80Hz-160Hz.
This setting does not affect the signal sent to the LINE OUT jacks.

Sleep Switch AUTO POWER 3. - the When activated, by the Automatically Power Sleep Mode conserves  the Turn-ING INTO STANDBY Unit Mode the After 10 minutes of non-the Use.

4. PHASE Switch - Use this switch to set the polarity of the amplified signal. In the 0 setting,

there is no change to the signal. When the switch is set to the in 180 setting, the signal's

polarity is changed by 180 °.

5. LINE IN - Connect an unbalanced RCA (-10dBV), line level signal here.

6. LINE OUT - Unbalanced RCA stereo line outputs to connect to satellite speakers.

7. SPEAKER LEVEL INPUT Terminals - Accepts full range signals from power amplifier.

8. SPEAKER LEVEL OUTPUT Terminals - Sends full range signals to satellite speakers.

9. POWER Switch - Use this switch to turn the speakers on and off. Powered on the when, The  Front Panel LED Light will.
10. Inlet AC -. The Connect supplied IEC Power Cable here
11. Fuse - The fuse is located behind the fuse cover. The same type Fuses with REPLACE Always  of Fuse.
12. Voltage Switch - Used to select the operating voltage.

NOTE: Be sure to check that the voltage setting and fuse rating are correct for your

country.


Specifications