PEAVEY KB1
1x8-inch Keyboard Amplifier
(20 watts)
Overview
Basically self-contained, compact sound systems, the KB® series amps are perfect for voice, keyboards, acoustic and electric guitar, drum machines and backing machines.
Features
8 inch extended range speaker
Two separate channels
2-band EQ per channel
Headphone out
20 watts of clean Peavey power
Weight Unpacked: 16.00 lb(7.257 kg)
Weight Packed: 21.00 lb(9.525 kg)
Width Packed: 18"(45.72 cm)
Height Packed: 19.5"(49.53 cm)
Depth Packed: 13.12"(33.3248 cm)
Front Panel View
CHANNEL
ONE
1.
INPUT
Signal
input for Channel One. This 1/4" jack input will accept signals from a
variety of keyboard and acoustic instruments.
2.
LEVEL
Controls
the Channel One 1/4" phone jack input level.
3.
LOW EQUALIZATION
An
active tone control (shelving type +/-15 dB) for boosting or cutting the bass
frequency range. CAUTION: Excessive low frequency boost can damage the speaker.
4.
HIGH EQUALIZATION
An
active tone control (shelving type +/-15 dB) for boosting or cutting the treble
frequency range.
CHANNEL
TWO
5.
INPUT
Signal
input for Channel Two. This 1/4" jack input will accept signals from a
variety of
Keyboard
and acoustic instruments.
6.
LEVEL
Controls
the Channel Two 1/4" phone jack input level.
7.
LOW EQUALIZATION
An
active tone control (shelving type +/-15 dB) for boosting or cutting the bass
frequency range. CAUTION: Excessive low frequency boost can damage the speaker.
8.
HIGH EQUALIZATION
An
active tone control (shelving type +/-15 dB) for boosting or cutting the treble
frequency range.
9.
HEADPHONE JACK
A
headphone jack is provided for stereo headphones. This switching jack
disengages the internal speaker when plugged in.
REAR PANEL VIEW
10. POWER SWITCH
On/Off
switch. The red pilot light illuminates when the unit is turned on
11.
IEC CONNECTOR/DETACHABLE LINE CORD
This
is a standard IEC power connector. An AC mains cord having the appropriate AC
plug and ratings for the intended operating voltage is included in the carton.
The main cord should be connected to the amplifier before connecting to a
suitable AC outlet.
12.
Maintain a clearance of 12” from any combustible surface.