Overview


The E15 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered.


E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke..


Features


High output, professional quality sound with 400 W continuous power


E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.


E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:

             - For PLD/CXD visit Amplifier Navigator Software

             - For GXD visit the GXD Firmware Updater


Rugged tour-grade textured paint


Foam-lined perforated steel grill


Available U-Style Yoke and M8 rigging kit for permanent installation


Dual angle pole socket


Buy it Now From an Authorized


Online Retailer 



E Series Dimensions


 Specifications

 

Model

E15

Configuration

1 x 15-inch, 2-way, non-powered 

Frequency Range (-6 dB)

55Hz – 20kHz

Power capacity²: continuous/peak

500 W / 2000 W

Sensitivity

 97dB, 1W@1m

Coverage Angle

75° conical DMT

Output (peak SPL @ 1 m)

130dB

Drivers

LF

HF

 

381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil

38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver 

Nominal Impedance

8Ω

Cross-over

Full-range only 1.55kHz 

Input connectors

 2x NL4, 1 x barrier strip

Enclosure

 Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining.

Mounting and suspension

 6 x M8 suspension points, dual angle, 35mm pole-socket

Net weight

31 kg / 68 lbs

Shipping weight

34 kg / 75 lbs