Peavey PV 118D
18-inch Active Subwoofer (1 pc)
Overview:
The Peavey PV 118D Active 18" Subwoofer features 300
watts of continuous power, 600 watts of peak available power and DDT
compression. The heavy duty 18" woofer has a balanced XLR input and a
balanced XLR output. The XLR out is switchable between Thru and High Pass Filter
modes, allowing it to forward a signal to a full-range speaker. The PV 118D
also has a 1/4" speaker-level input and volume level control.
The PV 118D is Class D powered and capable of up to 119 dB
peak SPL. The enclosure is made from 3/4" MDF, with a powder coated steel
grille. A woofer servo senses back-EMF from the woofer voice coil that is not a
result of the drive signal, and subtracts the error so that the woofer cone
follows the drive waveform precisely. Two Class D power amplifiers provide 300
watts peak available power each into the dual voice-coil woofer yielding 600
watts total into the 8Ω load of each voice coil of the woofer. Both amplifiers
feature Peavey DDT power amplifier compression, which greatly diminishes
audible power amplifier clipping.
Metal handles provide easy transport, while the top pole mount provides stability for full-range speakers. In the event of ground-loop hum between connected equipment, the PV 118D also features a ground-lift switch.
Features:
DDT™ compression
Crossover frequency 120 Hz
Bass contour circuit
4th order Linkwitz-Riley crossover
18" heavy duty woofer
Woofer Servo for reduced woofer distortion
Peak SPL up to 119 dB with music
Female XLR mic- or line-level balanced input
Male XLR thru, switchable either high-pass or thru
One 1/4" phone jacks for speaker-in capability
Class D powered system with 300 W total power
Weight Unpacked: 79.81 lb(36.2 kg)
Weight Packed: 85.54 lb(38.8 kg)
Width Packed: 25"(63.5 cm)
Height Packed: 29.5"(74.93 cm)
Depth Packed: 22.875"(58.1025 cm)