Overview:
The SmartRig+ 2-Channel XLR Microphone Audio Mixer from Saramonic is a portable microphone/guitar interface for recording professional-quality audio. The SmartRig+ makes your recording work easier by connecting professional microphones and guitars (or other instruments) to your smartphone, tablet, DSLR camera, or video camera. With two independent channels, it allows you to connect and control gain on multiple microphones or guitars at the same time. The interface also features three types of inputs to accommodate any setup: two combo XLR / 1/4" inputs, and two 1/8" jack inputs for connecting any instrument or microphone. It allows you to toggle between mono and stereo output modes as necessary.
Note: Acoustic Guitar and mobile phone not included.
Features:
Channels
Two Independent Channels
Inputs
Two XLR Microphone Inputs, Two 3.5mm (TRS) Microphone
Inputs, Two 1/4" Guitar Inputs
Outputs
Output switch for smartphone (TRRS) or
Camera/Camcorder/Recorder (TRS); 3.5mm Headphone Output Jack for Monitoring
Phantom Power
+48v Phantom Power Switch
Mono/Stereo
|
Frequency
Response |
20 Hz to 20 kHz (±0.5 dB) |
|
Distortion |
Less than 0.01% @ 1 kHz, -30 dBu input |
|
Signal to Noise
Ratio |
80 dB @ 1 kHz, -30 dBu input |
|
Gain |
20 dB to Infinity |
|
Power
Requirements |
1 x 9 VDC battery, alkaline or lithium |
|
Phantom Power |
48 V phantom power switch |
|
Channels |
2 independent channels |
|
Mono/Stereo |
Mono/stereo toggle output switch |
|
Inputs |
2 x combo XLR / 1/4" |
|
Outputs |
Output switch for smartphone (TRRS) or
Camera/Camcorder/Recorder (TRS) |
|
Dimensions |
4.7 x 1.6 x 1.6" (12 x 4 x 4 cm) |
|
Weight |
4.6 oz (130 g) |