RODE BROADCASTER
Precision Large Diaphragm Condenser Mic
Overview:
The RØDE Broadcaster is a large diaphragm, end address condenser microphone designed for broadcast voice applications.Its response has been tailored to give a rich, full, broadcast quality with an emphasised proximity effect, making it an ideal 'on air' radio microphone, equally fitting for voice over applications for film and television.
- The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output.
- In addition to the Broadcaster's native 20Hz-20kHz response a selectable high-pass filter at 75Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
- The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.
Features:
- HF2 1” capsule with gold plated diaphragm
- On-Air indicator LED
- Ultra low noise
- Voice tailored low-cut feature
- Internal pop-filter to reduce plosives
- Rugged stainless steel body
- Designed and manufactured in Australia
What's in the Box?
- Broadcaster - End-Address Broadcast Condenser Microphone
- RM2 - Ring-Mount Microphone Stand
- ZP1 - Padded Zip Pouch
Specifications:
| Acoustic Principle | Pressure Gradient |
| Active Electronics | JFET impedance converter with bipolar output buffer |
| Capsule | 1.00" |
| Polar Pattern | |
| Address Type | End |
| Frequency Range | 20Hz - 20kHz |
| Output Impedance | 40Ω |
| Maximum SPL | 128dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum Output Level | 2.0dBu (@ 1kHz, 1% THD into 1KΩ load) |
| Sensitivity | -34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Power Options | |
| Weight | 577.00gm |
| Dimensions | 167.00mmH x 50.00mmW x 50.00mmD |
| Output |