PEAVEY KB1



1x8-inch Keyboard Amplifier



 (20 watts)

Overview

Basically self-contained, compact sound systems, the KB® series amps are perfect for voice, keyboards, acoustic and electric guitar, drum machines and backing machines.

Features

8 inch extended range speaker

Two separate channels

2-band EQ per channel

Headphone out

20 watts of clean Peavey power

Weight Unpacked: 16.00 lb(7.257 kg)

Weight Packed: 21.00 lb(9.525 kg)

Width Packed: 18"(45.72 cm)

Height Packed: 19.5"(49.53 cm)

Depth Packed: 13.12"(33.3248 cm)

Front Panel View

CHANNEL ONE

1. INPUT

Signal input for Channel One. This 1/4" jack input will accept signals from a variety of keyboard and acoustic instruments.

2. LEVEL

Controls the Channel One 1/4" phone jack input level.

3. LOW EQUALIZATION

An active tone control (shelving type +/-15 dB) for boosting or cutting the bass frequency range. CAUTION: Excessive low frequency boost can damage the speaker.

4. HIGH EQUALIZATION

An active tone control (shelving type +/-15 dB) for boosting or cutting the treble frequency range.

CHANNEL TWO

5. INPUT

Signal input for Channel Two. This 1/4" jack input will accept signals from a variety of

Keyboard and acoustic instruments.

6. LEVEL

Controls the Channel Two 1/4" phone jack input level.

7. LOW EQUALIZATION

An active tone control (shelving type +/-15 dB) for boosting or cutting the bass frequency range. CAUTION: Excessive low frequency boost can damage the speaker.

8. HIGH EQUALIZATION

An active tone control (shelving type +/-15 dB) for boosting or cutting the treble frequency range.

9. HEADPHONE JACK

A headphone jack is provided for stereo headphones. This switching jack disengages the internal speaker when plugged in.

REAR PANEL VIEW

10. POWER SWITCH

On/Off switch. The red pilot light illuminates when the unit is turned on

11. IEC CONNECTOR/DETACHABLE LINE CORD

This is a standard IEC power connector. An AC mains cord having the appropriate AC plug and ratings for the intended operating voltage is included in the carton. The main cord should be connected to the amplifier before connecting to a suitable AC outlet.

12. Maintain a clearance of 12” from any combustible surface.