Overview:

The MXL FR-310 video mic delivers sound that's as focused as the video. Mount it onto your camcorder or DSLR camera, and you'll cut to tighter, cleaner sound recordings.

• The FR-310 shuts out sound from the sides and back, with a pickup pattern that targets sound in front of the camera.
• Three gain settings pull in the right amount of sound in close-up or long shot situations, while a bass roll-off switch leaves low-frequency noise on the cutting-room floor
• The integrated windscreen helps block wind noise, which aids in keeping your sound in the picture.

 Features:

• Three-position gain switch
• Bass roll-off (high-pass filter)
• Standard hot shoe mount
• Up to 500 hours per AAA battery
• Integrated foam windscreen
• Includes AAA Battery & Case

Attaching the microphone

• A standard hot shoe mount is located on the bottom of the FR-310. Rotating the knurled tightening ring counterclockwise will make mounting the microphone easier. Tightening the ring after the microphone is securely in the camera’s hot shoe mount will improve stability.
• The FR-310 is equipped with a captive signal cable that has a 3.5mm jack. Insert the jack into the external microphone socket on your recording device

Power

The FR-310 is powered by an internal AAA battery. Use a fresh battery to get the best performance from the microphone. We also recommend carrying a spare battery.

• A fresh battery should provide up to 500 hours of continuous recording.
• A battery indicator light is located on the right side of the microphone.
• When the indicator light is illuminated, the battery is close to running out of life and should be replaced.
• The light will not be illuminated when the battery is not close to running out of life or when the microphone is turned off.
• The indicator light will flash when the microphone’s power switch is moved to the “On” position.

Note: Remember to turn the microphone off when it is not in use.

Specification:

• Transducer:.............................10mm Electret Condenser
• Polar Pattern:..........................Supercardioid
• Frequency Response:.............40Hz - 20kHz
• Output Impedance:..................250 ohms
• Power Requirements:..............1.5V AAA Battery
• Bass Roll-Off:.........................-6dB / octave at 150Hz
• Gain:.......................................-5dB, 0dB, +5dB
• Output Connector:...................1/8" (3.5mm) Mini TRS
• Output Signal:.........................Mono
• Dimensions:............................5.3" x 2.5" (135mm x 63mm)
• Weight:.....................................0.30 lbs (136 g)