The Saramonic UwMic10 UHF wireless microphone system is intended for portable wireless operation and can be used in several environments for applications such as DSLR video, field recording, broadcast TV, electronic news gathering (ENG), on-the-spot interviews, and more.

Portable Receiver UwMic10-RX10

The Ares is Saramonic-RX10 Camera UwMic10-MOUNTABLE The Integrated Wireless Receiver. It Ares Features Wide Bandwidth The The The RF Switching, an The Easy-to-read LCD Display and Synchronization between Infrared Transmitter and Receiver.

 Receiving Unit:

The UWMIC10's RX-10 receiving unit is a camera-mountable integrated wireless receiver. It features a wide switching RF bandwidth, an easy-to-read LCD display and infrared synchronization between transmitter and receiver.

Equipped with an auto-scan function, the RX10 can automatically search for an available transmission frequency. The headphone jack enables real-time monitoring or the receiver via headphones, especially useful for cameras that lack a monitor output.

Transmitting Unit:

The UWMIC10's TX-10  compact transmitter employs a crystal-controlled PLL synthesizer. It is equipped with a muting function and a BMP-type mic input. The RF power output can be switched among high, middle and low.

Features:

*Reliable, broadcast-quality audio

*Wireless transmitter with lavalier microphone

*UHF frequency range: 614 MHz - 696 MHz

*96 selectable channels in 2 groups

*330 Operates Over '(100m) Open Areas, in. Or 200' (60m) with obstacles

*Easy to read LCD displays

Product Structure

① Antennas

② Power button

Press to turn on or off the RX10.

③ SET button

Long press the SET button to enter the displayed menu.

Then, short press the SET button to confirm your option or

long press again to exit without saving.

④ POWER indicator

Indicates the battery level as follows:

Green light: Sufficient battery level.

Red light: Low battery level.

⑤ RF indicator and infrared transmitter port

The infrared transmitter port sends the set frequency to a

transmitter.

RF indicator displays the RF input level as follows:

Green light: RF signal is strong.

Red light: RF signal is weak or disconnected.

⑥ + or – button

Selects functions or values shown on the display.

⑦ LCD display

Display menus, please refer to "LCD Display Operation

Guide" (page 5) for more details.

⑧ Battery compartment

Operates on two AA batteries (not included).

⑨ PHONE jack

It is a 3.5mm diameter and stereo mini headphone jack.

Connect a headphone to monitor the audio output.

Note: Please do not connect a headphone with a monaural

mini jack. As this may short-circuit the headphone

jack and distorted sound output.

⑩ OUTPUT jack

Connect the RX10 to a video camera, camcorder, mixer or

Amplifier with the supplied output cable.

⑪ Standard cold shoe

Packing list

TX10

  Body-pack transmitter: TX10

  Omni-directional lavalier microphone

 Microphone holder clip

Wind screen

Belt clip

RX10

•         Portable receiver: RX10

•         Shoe mount adapter

•         Belt clip

•         XLR-BMP audio output cable

•         3.5mm plug-bmp audio cable

Specifications